HP ProCurve 530 NA (J8986A) Management And Configuration Manual page 150

General System Configuration
Managing Group Configuration
N o t e
5-66
The current members of the selected group are listed in the Members list.
The IP addresses of the other members of the group appear as links. To jump
to the configuration interface of another member, click on its link.
When a group is being formed, there may be a delay of up to 2 seconds before
all members are listed.
Figure 5-16. Configuring Group Configuration
To add Group Configuration to the current access point:
Click Management > Group Configuration.
1.
Click Enabled to allow this access point to share configuration parameters
2.
with others in the same group.
In Group Name enter the name of the group the access point should belong
3.
to.
In Member ID enter a string (optional) that identifies the access point within
4.
the group.
Click [Update].
5.