Command Line Reference
Network Management Application Commands
9-38
snmp-server community restricted | unrestricted
This command defines the community access string for the read-only or read-
write access Simple Network Management Protocol. Use the no form to
remove the specified community string.
Syntax
snmp-server < community <comm> <restricted | unrestricted >
no snmp-server community <comm> <restricted | unrestricted >
comm - Community string that denotes it as private.
•
restricted - Specifies read-only access. Authorized management
•
stations are only able to retrieve MIB objects. The no version of the
command clears the read-only community value.
unrestricted - Specifies read-write access. Authorized management
•
stations are only able to retrieve MIB objects. The no version of the
command clears the read-write community value.
Default Setting
Restricted community with a public access default.
Command Mode
Global Configuration
Example
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)# no snmp-server community
<public> restricted
ProCurve Access Point 530(config)# no snmp-server community
<system> unrestricted
ProCurve Access Point 530(config)#