Group Configuration; Group-Config - HP ProCurve 530 NA (J8986A) Management And Configuration Manual

Group Configuration

Use the following commands to configure a group of access points whose
parameters are synchronized whenever one member of the group is updated.
Only parameters in the Group Configuration Parameter Block are synchro-
nized
Command
[no] group-config
group-config name <group-
name>
group-config member-id
<member-id>
show group-config
The parameters are synchronized only after the Update button is clicked (Web
User Interface) or after the write memory command (see "write" on page 9-55)
is issued (CLI).

group-config

The command enables or disables the group configuration feature on the
access point.
Syntax
[no] group-config
group-config - Enables the group configuration feature.
•
no group-config - Disables the group configuration feature.
•
Default Setting
N/A
Command Mode
Global Configuration
Example:
Function
Enables and disables the group configuration feature
on the access point.
Specifies the name of the configuration group the
access point will be part of.
Specifies an optional string identifying the access
point within the group.
Shows the radius-local users.
Command Line Reference

Group Configuration

Mode Page
GC 9-61
GC 9-62
GC 9-62
MC 9-63
9-61