HP ProCurve 530 NA (J8986A) Management And Configuration Manual page 486

File Uploads, Downloads, and Resets
Transferring Configuration Files
A-12
Using the CLI to Copy Data From a Remote Server to the Device. This
example displays how to copy data from a remote server (FTP) to this device.
If using this command for a FTP or STP server, you will need to include the
username and password for the server. The TFTP server does not need a
password or username..
ProCurve Access Point 530#copy ftp flash 192.168.1.52
copystart user-name chris password open
ProCurve Access Point 530#
Using the CLI to View Config Files. This example shows how to view the
running configuration of the device. This is an alias for the "show running-
config" command.
ProCurve Access Point 530#write terminal
------------------------------------------------------------
<?xml version="1.0"?>
<config>
<interface name="wlan0wds1">
<radio>wlan0</radio>
<type>wds</type>
<status>down</status>
<wep-key-length>104</wep-key-length>
<wep-key-ascii>no</wep-key-ascii>
<description>Wireless Distribution System - Link
2</description>
</interface>
--MORE-,next page: Space, next line: Enter, quit: Control-C
This examples shows how to view the startup configuration on the device.
ProCurve Access Point 530#show config
------------------------------------------------------------
<?xml version="1.0"?>
<config>
<interface name="wlan0wds1">
<radio>wlan0</radio>
<type>wds</type>
<status>down</status>
<wep-key-length>104</wep-key-length>
<wep-key-ascii>no</wep-key-ascii>
<description>Wireless Distribution System - Link
2</description>
</interface>
--MORE-,next page: Space, next line: Enter, quit: Control-C