HP ProCurve 530 NA (J8986A) Management And Configuration Manual page 302

Special Features
AP Detection Commands
8-32
Figure 8-11. AP Detection - Settings Tab
To Enable AP Detection Parameters:
Select Special Features > AP Detection and click the Settings tab.
1.
To enable scanning, select Enable from the AP Detection drop-down for the
2.
radio you are configuring.
3. To specify the beacon transmission interval, enter the interval value in the
Scan Interval field.
To specify the duration of scanning, enter the duration value in the Scan
4.
Duration field.
Select [Update] to save the settings.
5.