HP ProCurve 530 NA (J8986A) Management And Configuration Manual page 323

logging - Shows all the entries in the event log. See
•
page 9-32.
mac-auth-local - Show all the entries in the local MAC address authen-
•
tication control lists. See
qos - Shows QoS details on this device and wireless system. See
•
qos" on page 9-154.
radios - Shows information about the radio(s) on this device. See
•
radio" on page 9-116.
radius-local - Shows status of the internal RADIUS server on device. See
•
"show radius-local" on page 9-70.
running-config - Shows the running configuration file of this device. See
•
"show running-config" on page 9-60.
• snmp-server - Shows SNMP community and trap information. See
snmp-server" on page 9-45.
sntp - Shows configured time protocol and servers on this device. See
•
"show sntp" on page 9-35.
ssh - Shows SSH configuration and the status of active connections.
•
"show ssh" on page 9-26.
See
ssid - Shows SSID information on this device or radio context. See
•
"show ssid" on page 9-117.
stations - Show associated wireless station details. See
•
page 9-122.
supported-rate - Show information about supported transmission rates
•
on this device. See
system-information - Show global configured and operational system
•
parameters on this device. See
tech - Shows status of a predefined command sequence used by
•
technical support. See
time - Show current date and time. See
•
version - Show software version. See
•
wlans - Show WLANs information on this device or radio context. See
•
"show wlan" on page 9-119.
wds - Show information about the WDS's on this device. See
•
on page 9-160.
"show mac-auth-local" on page 9-74.
"show supported-rate" on page 9-123.
"show system-information" on page 9-27.
"show tech" on page 9-57.
"show time" on page 9-35.
"show version" on page 9-29.
Command Line Reference
General Commands
"show logging" on
"show
"show
"show
"show stations" on
"show wds"
9-15