HP ProCurve 530 NA (J8986A) Management And Configuration Manual page 125

Figure 5-9. The SNMP SNMPv3 Users Tab
To Add an SNMPv3 User:
Click Management > SNMP and select the SNMPv3 Users tab.
1.
Enter the new username in the Username field.
2.
Optionally, select an authentication method from the Authentication Type
3.
drop-down.
4. If you have selected an authentication method for the user, you must enter
a valid password in the Password field.
Optionally, select a privacy method from the Privacy Type drop-down.
5.
Adding a privacy method for the user requires that you also select an
authentication method.
6. If you have selected a privacy method for the user, you must enter a valid
password in the Password field.
Click [Update].
7.
To Edit an existing SNMPv3 User's settings:
Click Management > SNMP and select the SNMPv3 Users tab.
1.
General System Configuration
Configuring SNMPv3
5-41