Rebooting The Access Point; Web: Rebooting The System - HP ProCurve 530 NA (J8986A) Management And Configuration Manual

File Uploads, Downloads, and Resets

Rebooting the Access Point

N OT E
A-14
Rebooting the Access Point
Using the Web user interface and CLI described in this section, you can reboot
the access point, which cycles the system back to the last saved configuration.

Web: Rebooting the System

The Reboot tab on the System Maintenance screen enables the access point
to reboot to the last saved configuration file.
The Web interface enables you to perform this action:
■ [Reboot]: Submits a request to reboot the access point. A system confir-
mation message appears and provides opportunity to cancel.
During a reboot, connection to the AP is lost and the browser will not stay on
the System Maintenance screen while the reboot takes place. Test the connec-
tion to find out when the process has completed.
Figure A-3. Reboot Tab
To Reboot the Access Point:
1. Select Management> System Maintenance > Reboot tab.
To initiate the reboot process, click [Reboot].
2.