Wireless Security Configuration
Configuring RADIUS Client Authentication
7-36
The following example shows how to configure RADIUS primary or secondary
parameters for this WLAN.
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)# radio 1
ProCurve Access Point 530(radio1)# wlan 1
ProCurve Access Point 530(radio1-wlan1)# radius primary key
open
ProCurve Access Point 530(radio1-wlan1)# radius primary ip
192.168.1.53
ProCurve Access Point 530(radio1-wlan1)# radius primary mac-
format mutli-colon
ProCurve Access Point 530(radio1-wlan1)#
Web: Establishing Local RADIUS Accounts
Managing Existing RADIUS Accounts
The Local Radius screen shown in Figure 7-6 displays the existing local
RADIUS accounts configured on the access point:
■
Username: Displays the user name assigned to the account.
Real Name: Displays the real name assigned to the account.
■
Status: Displays the status of the account (Enabled or Disabled).
■
■
[Enable]: Enables the selected account.
[Disable]: Disables the selected account.
■
[Remove]: Removes the selected account.
■