HP ProCurve 530 NA (J8986A) Management And Configuration Manual page 170

Wireless Interface Configuration
Configuring the Radio
6-18
Figure 6-5. Configuring B + G Modes [Advanced Radio Settings]
To Configure B + G Modes:
The setting, shown in Figure 6-5, allows both b stations and g stations to
associate with the AP.
Select Network Setup > Radio.
1.
Click Status On to enable the radio.
2.
Select IEEE 802.11g Mode.
3.
Click the Edit button for Advanced Settings. A pop-up window for Advanced
4.
Settings opens (see Figure 6-5).
Select Enable for Protected Mode, to set this radio parameter.
5.
[Update]
6. Select to set the advanced radio parameters.