Show Ssid - HP ProCurve 530 NA (J8986A) Management And Configuration Manual

ProCurve Access Point 530# show radios
------------------------------------------------------------
Radio Status
-----------------------------------------------------------------------
1 Disabled
2 Disabled
ProCurve Access Point 530# show radio 1
Description Radio 1 - 802.11g
Base MAC 00:14:C2:A7:11:A0
Mode 802.11g
Channel 1
Preamble long
Slot-time short
Max Power(dBm) 16.0
Antenna Mode diversity
RTS-Threshold 2347
WMM QoS Disabled
Max Stations 256
Rate-Limiting (Disabled)
Rate-Limit(packets/second)
AP-Detection (Enabled)
Periodic Scan Duration(ms)
List Max Entries
ProCurve Access Point 530#
Example
Base MAC Address
00:14:C2:A5:22:E0
00:14:C2:A5:22:F0
50
30
255

show ssid

This command provides information about the Service Sets/Basic Service Sets
of the radio(s) on the device. If in a radio or WLAN context, displays informa-
tion only about the radio in context. This is functionally equivalent to the show
wlan command.
Syntax
show ssid [<name>] [ statistics ] [ all ]
name - Displays detailed information about the specified WLAN (SSID/
•
BSS).
statistics - Display traffic counters in addition to information about the
•
WLAN (SSID/BSS).
Mode Channel
802.11g 1 - Auto
802.11a 36 - Auto
Status
Channel-Policy
WLANs Supported
CTS Protection
Beacon-Interval(K-us)
Power Reduction(dB)
Antenna(s) In Use
Fragment-Threshold
Inactivity Timeout
Burst-Limit(packets/second)
Periodic Scan Interval(sec)
List Expiration Time(sec)
Command Line Reference
Wireless Interface Commands
TX-Power
0 dBm
0 dBm
Enabled
Auto
16
Enabled
100
0
internal
2346
1800
75
10
3600
9-117