Write - HP ProCurve 530 NA (J8986A) Management And Configuration Manual

Default Setting
N/A
Command Mode
Manager Exec
Example
This example shows how to reset the startup configuration to the defaults.:
ProCurve Access Point 530# erase startup-config
ProCurve Access Point 530#
Related Commands
copy custom-default startup-config

write

This command views or saves the running configuration of the device.
Syntax
write [ memory | terminal ]
memory - Copies the running configuration to the startup configuration
•
file. This is the same as the copy running-default startup-config command.
terminal - Displays the running configuration of the device on the
•
terminal.
Default Setting
N/A
Command Mode
Manager Exec
Example.
ProCurve Access Point 530# write memory
ProCurve Access Point 530#
Related Commands
copy running-config (page 9-53)
(page 9-51)
Command Line Reference
Flash/File Commands
9-55