Radius Primary | Secondary - HP ProCurve 530 NA (J8986A) Management And Configuration Manual

Example
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)# radio1
ProCurve Access Point 530(radio1)# wlan 1
ProCurve Access Point 530(radio1-wlan1)# radius failover-to-
local
ProCurve Access Point 530(radio1-wlan1)# radius retransmit
30

radius primary | secondary

This command configures RADIUS configures primary and secondary param-
eters for this WLAN. To validate these settings, use the show wlan <index>
page 117.
command, see
Syntax
radius < primary | secondary > < ip <ip> | local | mac-auth-password <pass-
word> | mac-format <multi-colon | multi-dash | no-delimiter | single-dash> | port
<port> | key <key> >
no radius primary | secondary
primary - Configure settings (IP, port, key) for the primary RADIUS
•
authentication server. The no version of the command disables use of
the primary RADIUS authentication server by clearing the IP address
setting.
secondary - Configure settings (IP, port, key) for the secondary RADIUS
•
authentication server. The no version of the command disables use of
the secondary RADIUS authentication server by clearing the IP
address setting.
ip <ip> - The IP address of the RADIUS server. Default is 192.168.1.10.
•
local - Use the local (built-in) radius server.
•
port <port> - The port of the RADIUS server.
•
key <key> - The shared secret string for the RADIUS server.
•
mac-auth-password <password> - Set the password that will be used by
•
wireless stations for remote MAC authentication with the primary
RADIUS server. The no version of the command clears the password
and uses the wireless stations' MAC addresses as the password.
mac-format multi-colon - MAC addresses are in the form
•
xx:xx:xx:xx:xx:xx.
mac-format multi-dash - MAC addresses are in the form xx-xx-xx-xx-xx-
•
xx.
mac-format no-delimiter - MAC addresses are in the form xxxxxxxxxxxx.
•
Command Line Reference
RADIUS Accounting/Authentication
9-67