Web-Auth (Global Address Pool) - HP ProCurve 530 NA (J8986A) Management And Configuration Manual

Command Line Reference
Web Authentication Commands
9-80
Command
web-auth custom-login-text [title <title-
text>] | [header <header-text>] | [footer
<footer-text>] | [descriptive
<descriptive-text>]
[no] web-auth default-welcome-page
web-auth custom-welcome-text [title <title-
text>] | [header <header-text>] | [footer
<footer-text>] | [descriptive
<descriptive-text>]
[no] web-auth default-failed-page
web-auth custom-failed-text [title <title-
text>] | [header <header-text>] | [footer
<footer-text>] | [descriptive
<descriptive-text>]

web-auth (Global Address Pool)

These commands enable configure the temporary pool of IP addresses used
by Web-Auth on the device. The no version of a command clears the field value.
Syntax
[no] web-auth starting-ip-address <ip-address> <subnet-mask>
[no] web-auth lease-time <lease>
ip-address - Specifies the starting IP address of the Web-Auth temporary
•
address pool.
subnet-mask - Specifies the subnet mask of the Web-Auth temporary
•
address pool.
lease - Specifies the lease, in seconds, granted to Web-Auth temporary
•
addresses.
Command Mode
Global Configuration
Function
Specifies the custom text field values
on the Web-Auth Login screen.
Enables or disables the default field
values for the Welcome screen.
Specifies the custom text field values
on the Web-Auth Welcome screen.
Enables or disables the default field
value values for the Failed screen.
Specifies the custom text fields on the
Web-Auth Failed screen.
Mode Page
IC-R- 9-83
WLAN
IC-R- 9-83
WLAN
IC-R- 9-83
WLAN
IC-R- 9-83
WLAN
IC-R- 9-83
WLAN