Cli: Viewing Software Versions - HP ProCurve 530 NA (J8986A) Management And Configuration Manual

To Upload a Local Software File:
1. Select Management> System Maintenance > Software tab.
2. Specify the path and file name of the software on the local computer in
the File Name field. You can use
on a local system.
To begin the upload of the discovered Software File, click [Upgrade].
3.
When the download is complete, restart the access point by clicking on
[Reboot]
the button. Alternatively, you can reset the access point defaults
and reboot the system by clicking on the
Resetting the access point is highly recommended.

CLI: Viewing Software Versions

CLI Commands Used in This Section.
Command
show version
Using the CLI to View Software Versions. This example displays how to
display the version of the software running on the device.
ProCurve Access Point 530# show version
Image Software Version
Boot Software Version
ProCurve Access Point 530##
File Uploads, Downloads, and Resets
Downloading Access Point Software
[Search]
to find the software upgrade file
[Reset]
button on the Reset tab.
WA.02.00.0412
WAB.01.00
CLI Reference Page
9-29
A-7