HP ProCurve 530 NA (J8986A) Management And Configuration Manual page 499

SNMP
Command Default Settings
[no] snmp-server
Restricted community with a public access default.
<comm>
restricted |
unrestricted
snmp-server Contact
contact<contact>
[no] snmp-server host Host Address: None
<host><comm> Community String: public
snmp-server port By default an SNMP agent only listens to requests from
<port>
port 161. However, you can configure this so the agent
listens to requests on another port.
snmp-server location None
<location>
snmpv3
Disabled
[no] lldp Enabled
Group Configuration
Command
group-config
Default Settings
Disabled
Defaults
SNMP
Mode Page
GC 9-38
GC 9-41
GC 9-40
GC 9-42
GC 9-41
GC 9-46
GC 9-48
Mode Page
GC 5-67
B-5