Cli: Setting The Management Password - HP ProCurve 530 NA (J8986A) Management And Configuration Manual

General System Configuration
Modifying Management Passwords
C a u t i o n
N o t e
5-8

CLI: Setting the Management Password

CLI Commands Used in This Section
Command Syntax
password manager <password>
This example shows how to create a manager password.
If you modify the password through CLI, you also modify the Web password.
The password is case sensitive and must be at least 1 character and at most
32 characters long. However, only the first 8 characters of the password are
used; character number 9 and above are ignored at log in.
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)# password manager 9gY2dV7G
ProCurve Access Point 530(config)#
CLI Reference Page
9-21