Options For Getting Help In The Cli; Displaying All Available Commands - HP ProCurve 530 NA (J8986A) Management And Configuration Manual

N o t e
ProCurve Access Point 530# ?
configure
copy
deauth-mac
end
erase
exit
log
logout
page
ping
reload
show
terminal
write
ProCurve Access Point 530#

Options for Getting Help in the CLI

At any command level in the AP530 CLI you can:
■ Display all commands available at that level
Display the completion of a command you have started to type
■
Display the next options available for the command you are currently
■
entering.

Displaying All Available Commands

To display all commands available at the current command level, type "?" or
[Tab]
press the key.
At a given command level you can display the commands that level offers, plus
any relevant commands available at preceding levels. For example, at the
Global Configuration level, you can display Global Configuration commands
plus all the commands available at the lower Manager Exec level.
For example, typing "?" at the Manager Exec level produces this listing:
Enter the Configuration context.
Copy data and configuration files to/from this device.
Enter MAC address to de-authenticate from this device.
Return to the Manager level context.
Erase stored files.
Return to the previous context or terminate current cons
ole/telnet session if you are in the Manager context lev
el.
Display all the entries in the event log.
Terminate this session.
Toggle paging mode.
Send ICMP Ping requests to a device on the network.
Warm reboot of the device.
Show operation information and parameters for this devic
e.
Set the dimensions of the terminal window.
View or save the running configuration of this device.
Figure 3-3. Example of the Manager Exec Level Command Listing
Using the Command Line Interface (CLI)
Using the CLI
3-11