Qos Ap-Params - HP ProCurve 530 NA (J8986A) Management And Configuration Manual

qos ap-params

This command configures QoS-related parameters on the device for this radio.
Syntax
qos ap-params <voice | video | best-effort | background> { [aifs <aifs>] [cwmin
<cwmin>] [cwmax <cwmax>] [burst <burst>]}
voice - High priority queue, minimum delay. Time-sensitive data such
•
as VoIP and streaming media are automatically sent to this queue.
video - High priority queue, minimum delay. Time-sensitive video data
•
is automatically sent to this queue.
best effort - Medium priority queue, medium throughput and delay.
•
Most traditional IP data is sent to this queue.
background - Lowest priority queue, high throughput. Bulk data that
•
requires maximum throughput and is not time-sensitive is sent to this
queue (FTP data, for example).
[aifs <aifs>] - Arbitration Inter-Frame Spacing (AIFS) specifies a wait
•
time in milliseconds for data frames. Valid values are: 1-255.
[cwmin <cwmin>] - Specifies the Minimum Contention Window QoS
•
parameter. The value specified is the lower limit (in milliseconds) of
a range from which the initial random backoff wait time is deter-
mined. Valid values for the "cwmin" are 1, 3, 7, 15, 31, 63, 127, 255,
511, or 1024. The value for "cwmin" must be lower than the value
for "cwmax".
[cwmax <cwmax>] - Specifies the Maximum Contention Window QoS
•
parameter. The value specified is the upper limit (in milliseconds) of
a range from which the initial random backoff wait time is deter-
mined. Valid values for the "cwmax" are 1, 3, 7, 15, 31, 63, 127, 255,
511, or 1024. The value for "cwmax" must be higher than the value
for "cwmin".
[burst <burst>] - Specifies the Maximum Burst Length QoS parameter.
•
This value specifies the length of time allowed for a packet burst
(collection of transmitted multiple frames without header informa-
tion) on a wireless network.Valid values for maximum burst length
are 0.0 through 999.9.
Defaults:See tabled output.
Command Line Reference
QoS Commands
9-149