HP ProCurve 530 NA (J8986A) Management And Configuration Manual page 174

Wireless Interface Configuration
Configuring the Radio
ProCurve Access Point 530# show radio 1
Description Radio 1 - 802.11g
Base MAC 00:14:C2:A7:11:A0
Mode 802.11g
Channel 11
Preamble long
Slot-time short
Max Power(dBm) 0.0
Antenna Mode diversity
RTS-Threshold 2347
WMM QoS Disabled
Max Stations 256
Rate-Limiting (Disabled)
Rate-Limit(packets/second)
AP-Detection (Enabled)
Periodic Scan Duration(ms)
List Max Entries
ProCurve Access Point 530#
6-22
The following example uses the show radio <radio> command to display this
access point's radio parameter details.
50
30
255
The following example uses the show stations command to display
connected stations to the access points.
ProCurve Access Point 530# show stations
Station On WLAN (radio index/WLAN index)
------------------------------------------------------------
00:0b:cd:5c:3b:da
00:0f:66:16:7a:77
00:0b:cd:5a:47:64
ProCurve Access Point 530#
Status
Channel-Policy
WLANs Supported
CTS Protection
Beacon-Interval(K-us)
Power Reduction(dB)
Antenna(s) In Use
Fragment-Threshold
Inactivity Timeout
Burst-Limit(packets/second)
Periodic Scan Interval(sec)
List Expiration Time(sec)
GJ SSID 1 (1/1)
GJ SSID 1 (2/1)
GJ SSID 1 (2/1)
Enabled
Auto
16
Enabled
100
0
internal
2346
1800
75
10
3600
Auth. Assoc. Fwd.
Yes - n/a
Yes Yes n/a
Yes Yes n/a