Commands and program listings
Monospaced text identifies commands and program listings as follows:
Example
use-access-list
ip_address
ssl-certificate=URL [%s]
[ONE | TWO]
New in this release
The following new features and enhancements have been added in releases 5.4.x:
New feature
Support for LLDP
Support for sFlow
802.1X supplicant
Description
Command name. Specify it as shown.
Items in italics are parameters for which you must supply a value.
Items enclosed in square brackets are optional. You can either include
them or not. Do not include the brackets. In this example you can either
include the "%s" or omit it.
Items separated by a vertical line indicate a choice. Specify only one of
the items. Do not include the vertical line.
For information see...
MSM7xx Controllers Management and Configuration Guide
MSM7xx Controllers Management and Configuration Guide
802.1X on page 3-6
Introduction
New in this release
1-5