HP ProCurve 530 NA (J8986A) Management And Configuration Manual page 294

Special Features
Wireless Distribution System (WDS) and Spanning Tree Protocol (STP)
8-24
Using the CLI to Create a Radio Link. This example sets the radio used
with this WDS link.
ProCurve Access Point 530(wds1)#radio-used 1
Using the CLI to Set Remote MAC. This example sets the remote MAC
address associated with this WDS link. The valid format is
00:00:00:00:00:00~FF:FF:FF:FF:FF:FF.
ProCurve Access Point 530(wds1)#remote-mac 00:0D:9D:C6:98:7E
This example sets the WDS WEP key type to ASCII when using static-wep
security. The no version of the command sets the key type to hexadecimal.
ProCurve Access Point 530(wds1)# wep-key-ascii
ProCurve Access Point 530(wds1)#
This example sets the WDS WEP key length when using static-wep security.
The options are 64 and 128.
ProCurve Access Point 530(wds1)# wep-key-length 64
ProCurve Access Point 530(wds1)#
This example defines the wep-key used for data encryption on a WDS inter-
face.
ProCurve Access Point 530(wds1)# wep-key abcde
ProCurve Access Point 530(wds1)#
Using the CLI to View WDS Parameters. These examples use the show
wds command to display the status of the WDS links.