Snmp-Server Port - HP ProCurve 530 NA (J8986A) Management And Configuration Manual

Command Line Reference
Network Management Application Commands
9-42

snmp-server port

This command specifies the port number that the SNMP server will use on
this device.
Syntax

snmp-server port

<port>
port - The number specifying the port to which the SNMP server will
•
listen. This must be an unused port on the AP.
Default Setting
161
Command Mode
Global Configuration
Example
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)# snmp-server port 161
ProCurve Access Point 530(config)#