Welcome Screen Default Values; Failed Screen Default Values; Guidelines For Deploying Web-Auth - HP ProCurve 530 NA (J8986A) Management And Configuration Manual

Registered User Only
Title Text Authentication Success
Header Text Authentication Success
Footer Text You now have access to the network You now have access to the network You now have access to the network
Descriptive Text
Please wait while the network
connection refreshes itself
Registered User Only
Title Text Unable to authenticate
Header Text Authentication Failed
Footer Text
Contact the network administrator if
you do not have an account
Descriptive Text Either the username and password are
invalid or service is unavailable at this
time

Welcome Screen Default Values

Table 7-6.

Welcome Screen Default Values

Failed Screen Default Values

Table 7-7.

Failed Screen Default Values

Guidelines for Deploying Web-Auth

■ Roaming is not supported. Users must re-authenticate when connecting
through a different access point.
■ Static VLAN assignment per WLAN is supported.
All Web-Auth configuration parameters are shared across APs with Group
■
Config enabled.
■ RADIUS accounting (start and stop) is supported for authenticated users.
■ A connection established using Web-Auth remains active until the client
is disassociated from the access point, even if the original browser
window is closed.
Web-Auth settings are included in the Group Configuration Parameter
■
Block, and are shared when Group Configuration is enabled (see
Group Configuration" on page
Guest User Only
Success
Success
Please wait while the network
connection refreshes itself
Guest User Only
Unable to authenticate
Authentication Failed
You do not have network access
5-63).
Wireless Security Configuration
Web Authentication for Mobile Users
Registered & Guest User
Authentication Success
Authentication Success
Please wait while the network
connection refreshes itself
Registered & Guest User
Unable to authenticate
Authentication Failed
You do not have network access
"Managing
7-63