HP ProCurve 530 NA (J8986A) Management And Configuration Manual page 46

Using the Command Line Interface (CLI)
Using the CLI
ProCurve Access Point 530(config)# ?
ap-authentication
buttons
cli-confirmation
console
copy
country
deauth-mac
dns
domain
end
erase
exit
group-config
hostname
inter-station-blockingEnable/disable blocking of direct communication between
interface
lldp
lockout-mac
logging
logout
mac-auth-local
page
password
ping
radio
radius-local
....
Figure 3-4. Example of the Configuration-Level Command Listing (Partial Listing)
3-12
Typing ? at the Global Configuration level produces this listing:
Configure username/password this access point uses to au
thenticate to the network.
Enable/disable the ability to clear the password(s) and/
or configuration(s) via the buttons on this device.
Enable/disable all confirmation dialogs for all CLI inte
rfaces on this device.
Enable/disable the serial console on this device.
Copy data and configuration files to/from this device.
Set the country code for the IEEE 802.11d regulatory dom
ain support.
Enter MAC address to de-authenticate from this device.
Configure DNS parameters.
Set the system domain name suffix to use when a domain n
ame suffix is not obtained through DHCP.
Return to the Manager level context.
Erase stored files.
Return to the previous context or terminate current cons
ole/telnet session if you are in the Manager context lev
el.
Add to a group, remove from a group, or re-configure gro
up-config settings.
Set the system hostname.
wireless stations on this device.
Enter the Interface Configuration level context for the
specified interface.
Enable/disable the Link Layer Discovery Protocol (LLDP)
service on this device.
Add or remove MAC addresses to be locked out of this dev
ice.
Configure logging/syslog-related settings for this devic
e.
Terminate this session.
Add/remove local MAC address authentication control list
s entries on this device.
Toggle paging mode.
Configure local passwords.
Send ICMP Ping requests to a device on the network.
Enter the Radio Configuration level context for a specif
ic radio.
Configure user accounts for the internal RADIUS server o
n this device.