Commands And Program Listings; New In This Release - HP MSM3xx Management And Configuration Manual

Introduction

New in this release

Commands and program listings

Monospaced text identifies commands and program listings as follows:
Example
use-access-list
ip_address
ssl-certificate=URL [%s]
[ONE | TWO]
New in this release
The following new features and enhancements have been added in release 5.5:
New feature or enhancement
New access points
Broadcast filtering
Band steering
Beamforming
Transmission protection
Identify RADIUS server by host name
LEAP support
1-4
Description
Command name. Specify it as shown.
Items in italics are parameters for which you must supply
a value.
Items enclosed in square brackets are optional. You can
either include them or not. Do not include the brackets.
In this example you can either include the "%s" or omit it.
Items separated by a vertical line indicate a choice.
Specify only one of the items. Do not include the vertical
line.
For information see...
This release supports the following new 802.11n
dual-radio access points: E-MSM430, E-MSM460,
and E-MSM466. For for more information on these
APs, see:
 E-MSM430, E-MSM460, and E-MSM466
802.11n Access Points Quickstart
 Radio configuration on page 3-8

802.11n MIMO antennas for the E-MSM466
on page C-2
Broadcast filtering on page 4-10
Band steering on page 4-10
Tx beamforming on page 3-28
Tx protection on page 3-29
Primary/Secondary RADIUS server on page 6-5
This release supports LEAP (with WEP, TKIP, or
WPA2 keys) when using an external RADIUS
server to validate user login credentials. Support is
automatic. No configuration is required.