Configuring Advanced Radio Settings - HP ProCurve 530 NA (J8986A) Management And Configuration Manual

Wireless Interface Configuration
Configuring the Radio
6-16

Configuring Advanced Radio Settings

Figure 6-3.

Configuring Advanced Radio Settings

To Modify Advanced Radio Settings:
Click Network Setup > Radio.
1.
Click Status On to enable the radio.
2.
Click the Edit button for Advanced Settings. A pop-up window for Advanced
3.
Settings opens (see Figure 6-3).
To enable rate limiting, click the Broadcast/Multicast Rate Limiting Enabled
4.
button.
If you enabled Broadcast/Multicast Rate Limiting, enter the Rate Limit and
5.
the Rate Limit Burst amounts.
To enable Protected Mode, click the Enable button.
6.