Qos Commands - HP ProCurve 530 NA (J8986A) Management And Configuration Manual

Command Line Reference

QoS Commands

C A U T I O N
9-148

QoS Commands

The QoS commands supported by the access point are listed below.
The default WMM parameters settings are usually adequate for WMM opera-
tion. Incorrect WMM settings can adversely affect network performance.
Changes to WMM parameters should be reserved for someone with an
advanced knowledge of how WMM operates. For more on WMM, see the IEEE
802.11e standard.
Command Function
qos ap-params
Configure QoS-related parameters on the device for this
<voice|video|best- radio
effort|background>
{<[aifs <aifs>]
[cwmin <swmin>]
[cwmax <cwmax>]
[burst <burst>]}
qos sta-params Configure QoS-related parameters on the wireless
<voice|video|best- stations.
effort|background>{
<[aifs <aifs>] [cwmin
<swmin>] [cwmax
<cwmax>] [txop-limit
<txop-limit>]}
[no] qos wmm Enables using Wireless Multimedia Extensions on this
WLAN.
show qos
Displays details about QoS settings on the device and
wireless client.
[no] rate-limit
<rate> Configures the maximum rate at which the access point
<burst>
transmits multicast and broadcast traffic.
Mode Page
IC-R 9-149
IC-R 9-151
IC-R 9-153
IC-R 9-154
IC-R 9-154