Network Setup Summary
Accessed through the Network Setup sash, the Network Setup screen displays
the Ethernet and radio features within the network setup group.
Figure 4-11. The Network Setup Summary Screen
The Network Setup screen summarizes:
Ethernet: details basic Ethernet parameters.
■
•
Connection Type: Indicates the type of connection.
•
MAC Address: The physical layer address for the Ethernet port
interface.
•
IP Address: IP address of this device.
•
Subnet: Subnet mask of this device.
•
Gateway: Gateway address of this device.
■
Radio One / Two: details basic Radio One & Two parameters.
•
Status: Indicates if the radio is up or down.
•
MAC Address: The physical layer address.
•
Mode: Displays the radio mode for Radio One (IEEE 802.11b or IEEE
802.11g).
•
Channel: Displays the channel on which the access point is currently
broadcasting.
•
Max Tx Power: Displays the maximum radio power level for the
selected mode in dBm.
■
WLAN / SSID / VLAN ID / Security: details basic WLAN parameters.
•
WLAN: Indicates the WLAN identifier. There can be up to 16 WLANs.
•
SSID: Indicates the Service Set Identifier (SSID) for the WLAN.
•
VLAN ID: Indicates the VLAN the WLAN is operating on.
•
Security: Indicates the configured security for the WLAN.
Using the ProCurve Web Browser Interface
Web Interface Screens
4-19