Mib Support; Web: Setting Basic Snmp Parameters - HP ProCurve 530 NA (J8986A) Management And Configuration Manual

General System Configuration
Configuring SNMP
5-26

MIB Support

The Access Point 530 supports the following Management Information Bases
(MIBs):
Read-Only Support
IEEE802dot11-MIB
RFC1155-SMI
MIB II (RFC 1213)
RFC-1215
SNMPv2-SMI (RFC2578)
SNMPv2-TC (RFC2579)
SNMPv2-CONF (RFC2580)
SNMPv2-MIB (RFC3418)
IANAifType-MIB (RFC2864)
IF-MIB (RFC2863)
BRIDGE MIB (RFC1493)
SNMP-COMMUNITY-MIB
SNMP-FRAMEWORK-MIB
SNMP-MPD-MIB
SNMP-USER-BASED-SM-MIB
SNMP-VIEW-BASED-ACM-MIB

Web: Setting Basic SNMP Parameters

The Management – SNMP screen controls management access to the access
point from management stations using SNMP.
Read-Write Support
HP-PROCURVE-WLAN-SMI
HP-PROCURVE-WLAN-TC
HP-PROCURVE-WLAN-SYSTEM-MIB
HP-PROCURVE-WLAN-AP-MIB
HP-PROCURVE-NOTIFY-MIB