Table of Contents
Advertisement
Sent to printer
The Printed Result is not what was Expected
Described solutions for situations in which the print result is different from that
expected.
Cannot print in color
No stapling done
Cannot print 2 sided
Printing performed with a
different paper size.
No
Cause The printer is connected to multiple computers.
Action Wait for a while, and then try printing again.
Cause Out of paper.
Action Supply paper to the printer.
Cause No paper for the specified paper size.
Action Set paper for the specified paper size.
Cause Copy operation is performed during interrupt, and interrupt
Action Cancel the interrupt operation.
Cause An error occurred with the printer.
Action Check the error details.
Cause In print options, the [Output Color] is set to [B/W].
No
Action
Cause The finisher is not attached.
No
Action
Cause The number of pages to staple exceeds 50.
Action
Cause The duplex module is not attached.
No
Action
Cause Insufficient print page buffer.
Action
Cause Paper size provided is different from the specified tray size.
No
Action
Refer to "Loading Paper in Trays 1 to 4" (P.232), or "Loading
Paper in Tray 5 (Bypass)" (P.233).
is performed.
Set [Output Color] to [Auto] or [Color].
A finisher is needed to perform stapling. Attach a finisher, or
remove stapling from the print options.
A maximum of 50 pages can be stapled. Reduce the
number of printed pages to 50 or lower.
For 2 sided printing, the duplex module is needed. Attach
the duplex module, or remove 2 sided printing from the print
options.
Add memory.
Change the paper size set in the tray, or change print
options to specify a tray that contains the appropriate size.
Trouble during Printing
449
16
Advertisement
Table of Contents
