Table of Contents
Advertisement
17 Appendix
Cautions and Limitations
This section describes notes and restrictions on the use of the machine.
Notes and Restrictions on the Use of the Machine
HDD Kit (Optional)
When the Print Results Differ from the Settings
Insufficient memory for the print page buffer may cause the following effects to occur,
giving results not expected from the settings. In this case, more memory is
recommended.
Options
Installing and Moving the Machine
17
Meter Counts for Duplex Printing
522
When the function extension kit is installed, you can specify the hard disk for storing
print data from lpd, SMB, and IPP. The storage for HP-GL/2 forms is also fixed at the
hard disk. Changes to other areas are not possible.
The data erased by formatting the hard disk consists of additional fonts, HP-GL/2
forms, and SMB folders. Secure print documents and logs are not erased.
Single-sided printing when duplex was specified
Jobs are canceled (if a page cannot be rendered in the print page buffer, the job
including that page is canceled)
To use the sorting (electronic collation feature), secure print, and print guarantee
features requires the optional HDD kit.
To use the machine as a PostScript printer requires the optional PostScript3 kit to be
installed.
When moving the machine from its rack, contact our Customer Support Center.
When moving the machine, do not subject the unit to shocks.
When closing the document cover, be careful not to trap your fingers.
Do not place things close to the ventilation opening of the extractor fan of the
machine.
For duplex printing, depending on the application being used and the way in which
the number of copies is specified, blank pages may be inserted automatically. In this
case, the blank page inserted by the application is counted for metering purposes.
Advertisement
Table of Contents
