Table of Contents
Advertisement
Glossary
Color Graduation
Communication(s)
Cut Paper
Default value
Dial
Dial Tone
Dial type
Document Image
DPI
ECM
Emulation
Error Code
F Code
F4800
Fax gateway
Description
Describes the degree of smoothness from one color to
another. Degrees are described by the number of graduated
steps. The higher the number, the more smooth the color
transition.
Communications using a network that can offer voice data
(telephone), image data (fax), video data (videotex) and PC
data (PC communication service) over the same channel.
In this document, sending/receiving of image data as well as
voice communications are referred to as "communications".
Standard paper sizes, such as A4, B5, etc.
The default shipped value, or the value set in System
Administration mode.
Refers to entering the fax number of the recipient.
Entry of all digits using the numeric keypad, Speed Dialing,
One Touch buttons, and using the Address Book, etc.
A tone generated by the telephone line. It indicates that you
are connected to the line.
Dial type for the connected line. For the machine, 3 types can
be selected: PB (push button), 10PPS (pulse line/10PPS).
The image of the document scanned by the machine.
Dots per inch. A unit used to describe printing resolution in
terms of the number of dots printed in one inch. Primary unit
used to describe resolution.
Error Correction Mode.
A type of G3 transmission, ECM transmission sends the
document image data in segments and retransmits segments
that the remote machine receives incorrectly.
"ECM" described on the [Activity Report] shows that the
communication was processed using ECM.
This refers to operating the printer to achieve the same print
results and when printing with another manufacturer's printer.
This mode is called Emulation Mode.
A code is displayed on the control panel or a report when a
problem occurs.
A transmission method defined by the CIAJ for using T.30*
sub-addresses standardized by ITU-T. Various functions can
be used with other companies that use F Code through
transmission between equipment with the F Code function.
(*transmission specification)
With the Internet Fax (iFax) feature on the machine, you can
use F Code to forward e-mail of fax documents received to the
mailbox.
Communication with a remote terminal abroad.
Also a displayed choice when setting the transmission mode.
A Communication Mode selection that reduces transmission
speed to enable reliable communications even under poor line
conditions.
Connects the Internet network to regular telephone lines,
enabling e-mail documents to be sent as fax documents to
regular fax machines.
Glossary
18
535
Advertisement
Table of Contents
