Table of Contents
Advertisement
3 Copy
Copying Procedure
This section describes the basic copy operations. The following shows the copying
procedure and reference sections.
Step 1 Loading Documents
There are two methods of loading documents.
Document Feeder
3
Document Glass
Document Feeder
The document feeder supports single sheet and multiple sheet documents, with sizes
ranging from 148.6 × 210mm (A5, A5 ) to a maximum of 297 × 432mm
(A3, 11 × 17 inches).
The document feeder can auto-detect only documents of standard sizes. For non-
standard size documents, input the size in the [Original Size] field.
The document feeder can accept the following number of sheets.
Lightweight paper (38-49 g/m
Plain paper (50-81g/m
Heavyweight paper (81-128g/m
For information about entering a custom size, refer to "Original Size (Specifying the Scan Size for the
Document)" (P.69).
For information about copying documents of mixed size, refer to "Mixed Size Originals (Scanning
Different Size Documents Simultaneously)" (P.70).
Important • Place folded or creased documents on the document glass to avoid paper jams.
46
Step 1 Loading Documents .........................................................................................................46
Step 2 Selecting Features ............................................................................................................48
Step 3 Entering the Quantity.......................................................................................................49
Step 4 Starting the Copy Job.......................................................................................................49
Step 5 Confirming the Copy Job in the Job Status .....................................................................50
Single sheet
Multiple sheets
Single sheet
Bound documents, such as books
Document type (weight)
2
)
• 2 sided scanning of lightweight paper (38-48 g/m
Number of
sheets
2
)
75 sheets
75 sheets
2
)
50 sheets
2
) is not supported.
Advertisement
Table of Contents
