Table of Contents
Advertisement
Fax Screen Default
You can set the default screen that appears when the [Fax/Internet Fax] screen is
displayed.
You can select from [Basic Features] and [Address Book].
Address Book Default
You can set the entry number from which the address book display starts.
Set the address number in the range from 1 to 500.
Note
Transmission Screen
Set whether to display the transmission progress during transmission.
Fax Defaults
Set the default values for the fax feature. When the power is turned on or the machine
returns from a power-saving state, or when the <Clear All> button is pressed, these
default settings take effect. By setting the defaults to commonly used features, you can
reduce the number of setting operations required in use.
1
Select [Fax Defaults].
2
Select the item to be set or
changed, and select [Change
Settings].
Note
3
Set the setting value.
4
Select [Save].
Resolution
You can set the default value for [Resolution] in the [Basic Features] screen.
Original Type
You can set the default value for [Original Type] in the [Basic Features] screen.
Lighten / Darken
Set the default value for [Lighten / Darken] in the [Basic Features] screen.
Mixed Size Originals
Set the default value for [Mixed Size Originals] in the [Scan Options] screen.
Note
Communication Mode
Set the default value for [Communication Mode] in the [Send Options] screen.
Send Header
Set the default value for [Send Header] in the [Send Options] screen.
• When the address book extension kit is installed, you can set a value up to 999.
• Select [
] to display the
previous screen and select
[
] to display the next screen.
• This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
Fax Mode Settings
11
303
Advertisement
Table of Contents
