Cleaning The Film And Document Feeder Glass - Fuji Xerox Document centre C360 User Manual

15 Maintenance
2
Wipe the document glass with a
soft cloth moistened with water to
remove any dirt and then wipe it
with a soft, dry cloth.
Important • Do not use cleaning agents
Note

Cleaning the Film and Document Feeder Glass

If the machine is equipped with a document feeder and the film and document feeder
glass are dirty, dirt may appear on copies and the machine may not properly detect
document sizes.
To ensure that clean copies are made, clean the machine about once a month.
Important • Do not use benzene, paint thinner, or other organic solvents. Doing so might damage paint
1
Wipe the film section with a soft
cloth moistened with water to
remove any dirt and then wipe it
with a soft, dry cloth.
15
Important • Do not press with excessive
Note
2
Wipe the document feeder glass
with a soft cloth moistened with
water to remove any dirt and then
wipe it with a soft, dry cloth.
Important • Do not use cleaning agents
Note
422
other than water or neutral
detergent.
• If it is difficult to remove dirt,
try gently wiping with a soft
cloth moistened with a small
amount of neutral detergent.
or coating on plastic parts.
• Cleaning the machine with an excessive amount of water may cause the machine to
malfunction or damage documents during copying.
force because the film is
easily damaged.
• Do not use cleaning agents
other than water or neutral
detergent.
• If it is difficult to remove dirt, try gently wiping with a soft cloth moistened with a small amount
of neutral detergent.
other than water or neutral
detergent.
• If it is difficult to remove dirt,
try gently wiping with a soft
cloth moistened with a small
amount of neutral detergent.