Table of Contents
Advertisement
16 Problem Solving
Image quality is not good.
16
452
No
Cause When using Login Setup/Auditron Administration, faxes are
Action
Cause Is the document feeder glass clean?
Action
Cause The sending density is not appropriate.
Action
Cause There is a problem with the receiver.
Action
sent directly from the computer.
When using Login Setup/Auditron Administration, to send a
fax directly from the computer, a correct user name and
password must be configured in the fax driver.
For information about Login Setup/Auditron
Administration, refer to "Login Setup/Auditron
Administration" (P.344). For information about sending
faxes directly from your computer, refer to "For more
information, refer to "Importing from Mailbox Viewer 2"
(P.219)." (P.212), or "Sending a Fax" (P.223).
Clean the document feeder glass.
Refer to "Cleaning the Film and Document Feeder Glass"
(P.422).
Adjust the density level.
Refer to "Density Level (Adjusting Density Level)"
(P.120).
Ask the remote station.
Note
• Poor output quality may be caused by the
remote machine.
Advertisement
Table of Contents
