Paper Types; Paper Type - Fuji Xerox Document centre C360 User Manual

10 Paper and Other Media

Paper Types

This section describes the kinds of paper available for this device.
Use of inappropriate paper may result in paper jams, cause reduced print quality,
malfunctions and other trouble. To make full and effect use of the machine's
performance, we recommend using only paper recommended by Fuji Xerox.
If you want to use paper not recommended by Fuji Xerox, contact our Customer
Support Center.
Important • The printed image may fade due to moisture such as water, rain or vapor. For more

Paper Type

Plain Paper (Printable Paper)
When using supplier paper (known as printable paper) for copies or printing, make sure
that it complies with the following specifications. However, it is recommended that you
use the standard paper types introduced on the next page, to achieve clear copy and
print results.
Important • Printing with paper that is a different type or size from the paper selected by the printer
Note
10
226
information, contact our Customer Support Center.
Paper tray
Trays 1 to 4
Tray 3 (high capacity)
Tray 4 (high capacity)
Tray 5 (bypass)
driver, or printing from an unsupported paper tray can result in paper jams. To ensure
correct printing, select the correct paper size, paper type, and paper tray.
• When copying with a non-standard paper size from Tray 5 (bypass), you must manually
enter the paper size. In addition, if you use a non-standard paper size often, you can preset
the size in the device. Then the preset size appears under [Standard Sizes] in the [Tray 5
(Bypass)] screen. For information about setup, refer to "Tray 5 (Bypass) Paper Size
Defaults" (P.262).
• When using 12 × 18 inch paper from Tray 5 (bypass) to copy or print, slide the paper guide
before setting the paper.
• You can further categorize image quality processing methods for plain paper. For more
information, refer to "Paper Type Priority" (P.261).
• When sheets such as postcards, which are B5 in size or narrower are printed continuously,
the non-paper passage side on the fuser unit heats up. For this reason, the message
"Please wait" is sometimes displayed and output is discontinued. Printing resumes after one
to 2 minutes. The message "Please wait" is also sometimes displayed and printing is
discontinued for 30 seconds or more when one sheet of paper A5 in size or smaller has
been printed.
• For the Document Centre C360/C250, no configuration is provided for a high capacity paper
tray.
Weight
2
64 to 98 g/m 560 sheets (Xerox P paper)
2
64 to 98 g/m 980 sheets (Xerox P paper)
2
64 to 98 g/m 1,280 sheets (Xerox P paper)
2
55 to 220 g/m Up to 10mm 100 sheets
(Xerox P paper)
Loadable quantity