Printing And Deleting Stored Documents; Charge Print - Fuji Xerox Document centre C360 User Manual

Printing and Deleting Stored Documents

This section describes how to print or delete documents stored by the secure print or
sample print feature, or documents stored by authentication print receiving control.
Note
Carry out printing and deletion of stored documents from the following [Job Status]
screen.
1
Press the <Job Status> button.
2
Select the [Stored Documents] tab.

Charge Print

When authorization features are in use, print jobs which have failed to authenticate
(incorrect authentication details such as UserID or password on the print drivers) are
processed according to the settings in [Charge Print Settings].
This section describes how to print or delete documents stored by charge print
receiving control.
For more details of charge print settings, refer to "Charge Print Settings" (P.350).
1
Press the <Log In/Out> button.
2
With the numeric keypad, enter the
UserID for whom the auditron
apply, and select [Confirm].
3
Select [Charge Print].
4
Select the number you want to
check, and select [Document List].
Note
5
Enter the password, and select
[Confirm].
Note
6
Select the document you want to
print or delete.
• This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
• Select [Refresh] to display the
updated information.
• Select [ ] to display the previous screen and select [
• With the numeric keypad, you can also enter a three-digit number directly.
• If no password is set, the
[Password] screen does not
appear.

Printing and Deleting Stored Documents

] to display the next screen.
12
359