Fuji Xerox Document centre C360 User Manual page 42

2 Product Overview
3
Select [System Settings].
4
Select [System Settings].
5
Select [Common Settings].
2
6
Select [Machine Clock/Timers].
7
Select [
8
Select [7. Auto Power Saver], and select [Confirm/Change].
9
Using [
saver mode migration time from 1
to 240 minutes, in 1 minute
increments.
From Last Selection to Low Power Mode
Set the time to move to the [Low Power Mode] after the last operation.
Note
From Last Selection to Sleep Mode
Set the time to move to the [Sleep Mode] after the last operation.
Note
10
Press [Save].
11
Select [Close] repeatedly until the [System Settings/Registration] screen is displayed.
12
Select [Exit] to exit the System Administration mode.
40
].
] [ ], configure a power
• The default for [From Last Selection to Low Power Mode] is [15] minutes. The Low Power
Mode cannot be set to [Disabled].
• The default for [From Last Selection to Sleep Mode] is [60] minutes. Configure the [From
Last Selection to Sleep Mode] time to be longer than the [From Last Selection to Low Power
Mode] time.