Table of Contents
Advertisement
Print Area
Set whether to expand the print area.
For information about the print area, refer to "Printable Area" (P.501).
Substitute Tray
When there is no tray containing the paper size selected by the automatic tray
selection, select whether or not to print replaced with paper loaded in another paper
tray. In the event of using substitute tray, set the size.
Display Message
Do not use substitute tray, but display a paper loading message.
Use Larger Size
Replace with the next larger paper size than that selected, and print at the same size.
Use Nearest Size
Replace with the closest paper size to that selected, and print. If necessary, the printing
is automatically reduced in size.
Note
Select Tray 5 (Bypass)
This prints using the paper in tray 5 (bypass).
Paper Attributes Mismatch
Set the action to be taken when the paper type loaded in the paper tray does not match
that specified.
Print
Carry on printing, even if the paper type is different.
Display Confirmation Screen
Show a confirmation screen, and prompt for action.
Unregistered Forms
When a form specified for printing in a form data file (overlay printing) is not present on
the host computer, set whether to print the job or not. If you specify [Print], since the
specified form is not present, only the data is printed.
This setting is added to the print settings menu when there is a print specification from
the host computer.
Print ID
Set whether user information is printed when printing using ART EX printer driver. The
first 64 letters of the user information is printed.
Select where to print. [Top Left], [Top Right], [Bottom Left], or [Bottom Right].
Note
• If there is a client specification, the client specification takes precedence.
• UserID must be set in ART EX printer driver before Print ID can be used. For more
information about how to set, refer to the print driver's online help.
• When user information is not available [UnknownUser] is printed
Print Mode Settings
11
293
Advertisement
Table of Contents
