Table of Contents
Advertisement
1
Remove any paper clips and
staples before loading documents.
2
Set the document to be scanned
face up (front-side up for 2 sided
documents) in the document feeder
in the direction of the arrow.
Note
3
Adjust the movable document
guides to just touch the edge of the
document stack.
Document Glass
The document glass accepts single-sheet or book form documents of sizes up to 297
× 432mm (A3, 11 × 17 inches).
The document glass can auto-detect only documents of standard sizes. For non-
standard size documents, input the size in the [Scan Size] field.
For information about entering document sizes, refer to "Scan Size (Specifying a Scanning Size)"
(P.179).
1
Open the document cover.
2
Place the document face down,
and align it against the top left
corner of the document glass.
3
Close the document cover.
• Documents should normally
be set with [Head to Left].
When viewing scanned
documents on a computer, the
document is imported as
[Head to Top].
• The <Confirmation> indicator lights when the document is loaded correctly.
Scanning Procedure
5
155
Advertisement
Table of Contents
