Table of Contents
Advertisement
16 Problem Solving
Error Code
016-702
016-703
016-704
016-705
016-706
16
016-707
016-708
016-710
016-711
016-712
464
Category
C P F S M O
[Cause]
[Remedy] Take one of the following actions.
For information about print modes and print guarantees, refer to the print
driver's online help. For information about memory, refer to "Allocate
Memory" (P.290).
[Cause]
[Remedy] Take one of the following actions.
[Cause]
[Remedy] Remove unnecessary documents from the mailbox, and
Refer to "Printing/Deleting Documents in Mailbox" (P.190).
[Cause]
[Remedy] A HDD kit is needed to use the Secure Print feature.
Refer to "Secure Print" (P.360).
[Cause]
[Remedy] Remove unnecessary documents stored on the printer,
For information about Secure Print, refer to "Secure Print" (P.360). For
information about mailboxes, refer to "Printing/Deleting Documents in
Mailbox" (P.190).
[Cause]
[Remedy] A HDD kit is needed to use the Sample Print feature. If
[Cause]
[Remedy] Remove unnecessary data from the hard disk to
[Cause]
[Remedy] A HDD kit is needed to use the Delayed Print feature.
Refer to 016-985.
Refer to 003-752.
Cause and Remedy
PCL print data could not be processed as there was
insufficient print page buffer.
Set [Print Mode] to [Speed Priority].
Use Ensure Print.
Increase the size of the print page buffer.
Add on memory.
Mail specifying a non-registered or invalid mailbox No.
was received.
Request the sender to register the mailbox with the
specified number.
Request the sender to send to a valid mailbox.
Documents stored in the mailbox have reached the limit,
and hard disk capacity is insufficient.
save the document.
Unable to register a Secure Print document, because the
HDD kit is not installed.
The maximum number of Secure Print users has been
exceeded, and no space is available on the hard disk.
and delete unnecessary Secure Print users.
Unable to sample print, because the HDD kit is not
installed or has malfunctioned.
the kit is malfunctioning, contact our Customer Support
Center.
Annotation is not possible due to insufficient hard disk
space.
increase free disk space.
Unable to register a Delayed Print document, because
the HDD kit is not installed.
Advertisement
Table of Contents
