Table of Contents
Advertisement
16 Problem Solving
Document Jams
If a document jams on the document feeder, the machine stops, and an error message
is displayed on the touch screen. Clear the document jam according to the instructions
displayed, and then load the document again on the document feeder.
1
Pull up the handle at the front of the
left cover on the document feeder,
and open the left cover until it
comes to a stop.
Note
2
If the document is not caught in the
input section, you can remove it.
3
If there are instructions to turn the
wheel, turn the green wheel to eject
the document upward.
16
Important • If the document is stuck, do
4
If there are instructions to open the
inner cover, lift up the lever with the
green seal on it, and open the inner
cover.
5
Turn the green wheel to eject the
document upward.
Important • If the document is stuck, do
6
After closing the inner cover, close
the left cover until you hear it click
into place.
486
• When you fully open the
cover, it enters a fixed
position. Open the cover
gently.
not pull on it directly. The
document could be damaged.
not pull on it directly. The
document could be damaged.
Advertisement
Table of Contents
