Table of Contents
Advertisement
3 Copy
Front Cover
Make copies with a cover output on a different type of paper before the first page of the
document. Also, if [On] of [Printed Covers] is selected, copies can be made from the
first page of the document on a different type of paper.
Front & Back Covers
Outputs a cover on a different type of paper before the first page and after the last page
of the document. Also, if [On] of [Printed Covers] is selected, copies can be made on a
different type of paper for the cover on the first page and last page of the document.
Printed Covers
Paper Tray Settings
Displays the [Covers - Paper Tray Settings] screen.
3
Select the tray to use from [Body Pages Tray] and [Covers Tray]. Select trays with
paper of the same size and orientation for the copy paper and the cover.
When [Bypass...] is selected, the [Tray 5 (Bypass)] screen appears. For more information, refer to
"[Tray 5 (Bypass)] Screen" (P.56).
Transparency Separators (Inserting Blank Sheets between
Transparencies)
A blank sheet can be output inserted as a separator between copied transparencies.
At the same time, only the required number of copies for distribution is printed. When
loading transparencies in Tray 5 (bypass), make sure that the paper for the separators
(or for distribution) is loaded at the same orientation as that of the transparencies.
Important • Use V516 (Xerox film [no border]) transparency sheets. Using transparency sheets for color
Note
1
Select [Transparency Separators].
2
Select any item.
Off
Transparency separators are not used.
Blank Separators
A blank sheet of paper is inserted as a separator each time a transparency is copied.
Only one set of copies can be made.
80
Off
A blank sheet of paper is attached as the cover.
On
The document is copied to the cover from the first page. When you only want to copy
to the outside of the cover, insert a blank sheet of paper in the document.
(V556/V558 [with white boarder]) may cause a malfunction or paper jam.
• This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
• When loading A4 size transparencies on Tray 5 (bypass), we recommend loading them
vertically.
Advertisement
Table of Contents
