5 Scan
Output Format
In the [Output Format] screen under [E-mail], [Scan to Mailbox], [Job Template], or
[Scan to FTP/SMB], you can configure the output format. For more information, refer to
below.
1
From the [All Services] screen,
select either [E-mail], [Scan to
Mailbox], [Network Scanning], or
[Scan to FTP/SMB].
2
Select the [Output Format] tab.
Note
Image Compression (Specifying an Image Compression Ratio When
5
Scanning)
When scanning a document from the [Basic Scan] screen with [Output Color] set to
[Full Color] or [Grayscale], select the image compression ratio.
1
Select [Image Compression].
2
Set the image compression ratio.
You can choose from among 5
levels of compression, including the
3 below.
High
Image is saved with high compression. Image quality degrades, but file size decreases.
Normal
Image is saved with standard compression. Results in a standard image quality and file
size.
Low
Image is saved with low compression. Image quality improves, but file size increases.
182
Image Compression (Specifying an Image Compression Ratio When Scanning)....................182
Read Status (MDN)...................................................................................................................183
Split Send (Sending in Sections)...............................................................................................183
Document Name (Specifying a Filename to Save to)...............................................................183
Login Name...............................................................................................................................184
Password ...................................................................................................................................184
Meta Data..................................................................................................................................184
• Fields displayed vary depending on the selected feature. The screen at right is for the e-mail
feature.