Table of Contents
Advertisement
13 Machine Status
Setup
You can check or set the value set for a printer mode item number.
PDF, PCL and HP-GL2 emulation modes are available for the machine. For information on KS
emulation modes, refer to the User Guide for the Hangul model. For information on the ESCPK
emulation mode, refer to the User Guide for the Traditional Chinese model.
1
Select [Setup].
2
Enter the [Item No.] for the feature
to be set, using the numeric
keypad.
3
Select [Confirm] if necessary.
4
Select [Change Value].
5
Enter [New Value], using the numeric keypad.
6
Select [Save].
Item Number
13
Enter the item number for the feature you want to set.
Current Value
When you enter an [Item Number], this shows the currently set value.
New Value
Enter the value to which you want to change the setting.
Stored Programming - Store/Delete
You can save the printer mode in memory. You can save up to 20 modes for HP-GL/2
emulation.
1
Select [Store/Delete].
2
Select [Store Current Selections] or
[Delete].
3
Select the memory number you
want to store or delete.
Storing Current Selections
This stores the current selections. If you select a number in which information is already
stored, this is overwritten. Overwritten data cannot be restored.
Delete
When you select [Delete], and select the number to be deleted, this deletes the
information stored in this number.
Important • Deleted data cannot be restored.
372
Advertisement
Table of Contents
