Table of Contents
Advertisement
2 Product Overview
Customizing of the Control Panel
You can customize the <Custom> buttons and items on the [Menu] screen.
Assigning a Feature to Custom Buttons
By assigning a feature to Custom buttons (<Copy>, <Custom 2>, and <Custom 3>),
you can switch to that feature without returning to the [Menu] screen.
The factory default settings for these buttons are, "Copy" for the 1st button, and none
for the 2nd and 3rd buttons.
For about procedure to assign features, refer to "Screen Defaults" (P.258).
Attach the labels included in this product when you have changed the assignment. If
you have used a feature for which no label is provided, use a blank label and write down
the feature using a permanent marker and attach it to the appropriate Custom button.
Customizing the [Menu] Screen
You can customize the types of features and the location of buttons on the [Menu]
screen.
2
The following shows the factory default settings.
For about procedure to assign features, refer to "Screen Defaults" (P.258).
Note
44
• When the feature is not available the button will not be displayed. Also, if the feature is
unavailable due to hardware problems, the button will be grayed out.
Copy
Fax/Internet Fax
E-mail
Scan to Mailbox
Network Scanning
Scan to FTP/SMB
Check Mailbox
Stored Programming
Job Flow Sheets
Language
Setup Menu
Print Mode
Fax Receiving Mode
Activity Report
Auto Gradation Adjustment
Advertisement
Table of Contents
