The Printed Result Is Not What Was Expected - Fuji Xerox DocuCentre 9000 User Manual

15 Problem Solving

The Printed Result is not what was Expected

Described solutions for situations in which the print result is different from that
expected.
15
490
No
Sent to printer
No stapling done
No
No folding
No
Printing performed with a
different paper size.
Cause Out of paper.
Action Supply paper to the printer.
Cause No paper for the specified paper size.
Action Set paper for the specified paper size.
Refer to "Loading Paper in Trays 1 to 2" (P.271), or "Loading
Paper in Tray 5 (Bypass)" (P.273).
Cause Copy operation is performed during interrupt, and interrupt
is performed.
Action Cancel the interrupt operation.
Cause An error occurred with the printer.
Action Check the error details.
Cause The number of pages to staple exceeds 100 or the number
exceeds 50 with staple cartridge for 50 sheets.
Action Staple-enabled number of pages is 100 or lower. For
Z-folding, staple-enabled number of pages is 10 or 5
sheets depending on the size of the paper used. For a
booklet, up to 15 sheets can be stapled at once.
Reduce the number of copies not over the limited
number.
Cause The folder is not attached.
Action Check the options attached with this printer, and reset the
printer configuration
Cause Paper size provided is different from the specified tray size.
Action Change the paper size set in the tray, or change print
options to specify a tray that contains the appropriate size.