On-Hook (Confirming Remote Machine Response Prior To Transmission) - Fuji Xerox Document centre C360 User Manual

On-hook (Confirming Remote Machine Response Prior to Transmission)

Use this feature when using Manual Send.
Manual Send is a transmission method that involves confirming the remote machine
response with an external telephone or when the machine is in an on-hook state prior
to beginning transmission.
We recommend setting the monitor volume to Loud when using this feature.
A Xerox customer engineer will set the Manual Send feature. For more information,
contact our Customer Support Center.
Note
The line monitor volume can be changed in the System Administration mode. For information about
how to change the default values, refer to "Line Monitor Volume" (P.257).
1
Pick up the telephone or select
[On-hook (Manual Send/Receive)]
on the [On-hook/Others] screen.
2
Select [Manual Send].
3
Select [Alphanumeric] or [Symbol].
4
Specify a recipient with the
keyboard screen.
5
If you hear the sound of a fax
machine, press the <Start> button.
6
If you used the telephone, replace it when the transmission ends.
Important • Be sure to replace the telephone properly. Otherwise, the line will remain in the busy state.
7
Select [Close] or [Exit (Line Cut)].
• When an error occurs from the second page while sending multiple pages, the first page
may end abnormally.
On-hook/Others
4
139